E. R. Schroeder's Custom Furniture Upholstering               Return to Home Page!

Making blind ply grip sheets with aluminum siding!

            

Finished sheet! Grommet tool used to install snaps on canvas.

       

I made these die cutters. Used to cut holding points in metal!

       

When the clamp is closed it will punch the desired point through the aluminum.

       

When the metal is stapled to a frame  the points will be like using ply grip, the

fabric or vinyl tucked under it will hold until the metal is hammered down. I use this

tool to make holding points on motor cycle seats, car headliners and furniture!

 

Return to Home Page!