E.R.Schroeder's Custom Furniture Upholstering
6650 Crescent #14 Ventura, California 93003
Center seat cushion was refilled with h r foam and back with sewed sheet Dacron case filled with loose Dacron.
When having foam cushions refilled, you must tell us what is wrong with the cushions and how soft or firm you want them. The best way to select the density is to come into the shop and test the new items for yourself. When sitting in your chair or sofa you may bottom out or have a hard time getting up, most of the time your cushions need to be replaced. You can test the furniture by removing the cushion and pushing down on deck area. If the furniture is firm (will not go down more than 2.5 inches) then replace the cushions. If it really sags further, you may need to call an upholsterer!
When refilling cushions, you must measure where the cushions set! All fabric, vinyl, canvas and leather shrink in time. We will cut the foam to fit the correct area and make the cushion refill fit better! Measure your furniture before you have the cushions replaced (front to back(C1,C2,C3&C4) and from side to side(T1,T2 &T3). The cushions height is not measured by the front edge, but by the middle of the cushion (FH).
Process when filling a seat cushion! ( Scroll down page!)!)
Seat cushion before !!!!! Seat cushion after refilled with H.R.Foam!
Process when filling a back cushion! ( Scroll down page!)!
Cushion before refilling New sheet Dacron sewed into a case with zipper. Dacron case inserted in cushions and loose Dacron inserted into case!
Dacron was run through a shredder Finished back cushion has new inner case with
where it was enlarged and softened. two more sheets of new Dacron, Shredded
(showing only one small amount) Dacron installed with 35% more new soft Dacron.